All of our mounts are made in the USA, using marine grade aluminum with a perfect powder coat or Bare Aluminum. Your choice of White or Black. Design to fit on the Deck of a Pontoon Boat, but can also be used in other locations on a boat that is raised off the water. Made from thick gauge aluminum and built to keep your boat steady from the heavy torque that wind, current, and wake can put on a boat.
Designed with nylon bushings with an inner diameter of 0.98 inches, these will accept all 3/4 inch pole anchors including our modular 3/4 inch OD rod anchors. Our modular anchors utilize stainless steel couplings that are machined from solid bar stock and measure 0.825″ in outer diameter. These fit perfectly through our Deck Mounts. The bushings have an added benefit in that they wont scratch up your shallow water anchor increasing the usage life of your anchoring system.
NOMINAL DIMENSIONS
Vertical Tube Length: 4.7 in / 119 mm
Inner Diameter of Shallow Water Anchor Hole: 0.98 in / 24.89 mm
Mounting Plate Max Width: 4 in / 101 mm
Mounting Plate Max Width: 3 in / 76.2 mm
Mounting Plate Max Thickness: 0.29 in / 7.3 mm
Mounting Plate Hole Diameter: 0.268 in / 6.8 mm (4 holes)
Powder Coat Color: BLACK / Bare Aluminum (Your Choice)
Weight: 9.5 oz / 270 g
Deck Mount Diagram
For use with the following products:
About Max-Gain Systems, Inc.
Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.
Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge, and we can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…