RP-TNC RF Connectors and Adapters

RP-TNC Connections

The TNC RP (Reverse Polarity) connector is a variation of the standard TNC connector. The female contacts that are normally found in jacks are located in the plugs and the male contacts that are normally found in plugs are located in jacks. RP-TNC connectors are used in many wireless and WI-FI applications. The TNC (Reverse Polarity) is also noted as: RP-TNC, RP TNC, TNC-RP, TNC RP, RTNC, and Reverse Polarity TNC.

RP-TNC Male RP-TNC Plug 50 ohm
RP-TNC Male (Plug)
RP-TNC Female RP-TNC Jack 50 ohm
RP-TNC Female (Jack)

RP-TNC Male

ImageSKUDescriptionPriceBuyhf:att:pa_connection-type-2hf:att:pa_adapter-attribute
RP-TNC-male / SMA-female Adapter (P/N: 7853)
7853RP-TNC-male / SMA-female$5.00
sma-2 sma-femalebetween-series reverse-polarity
8601*RP-TNC-male / BNC-female Coaxial Adapter Connector, BNC female to RP TNC male$4.00
bnc-2 bnc-femalebetween-series reverse-polarity
8901RP-TNC-male / RP-SMA-female$5.00
rp-sma-2 rp-sma-femalebetween-series reverse-polarity
RP-TNC-male / N-male Adapter (P/N: 8904)
8904RP-TNC-male / N-male$5.00
n-2 n-malebetween-series reverse-polarity
8905RP-TNC-male / N-female$5.00
n-2 n-femalebetween-series reverse-polarity
8914RP-TNC-male / RP-TNC-male$5.00
rp-tnc-2 rp-tnc-male

RP-TNC Female Adapters

ImageSKUDescriptionPriceBuyhf:att:pa_connection-type-2hf:att:pa_adapter-attribute
7345*RP-TNC-female / N-male$6.00
n-2 n-malebetween-series reverse-polarity
RP-TNC-female / RP-SMA-male Adapter (P/N: 7490)
7490RP-TNC female / RP-SMA male$5.00
rp-sma-2 rp-sma-malebetween-series reverse-polarity
8602*RP-TNC-female / BNC-female Coaxial Adapter Connector, BNC female to RP-TNC female$3.00
bnc-2 bnc-femalebetween-series reverse-polarity
RP-TNC-female / SMA-male Adapter (P/N: 8902)
8902RP-TNC-female / SMA-male$5.00
sma-2 sma-malebetween-series reverse-polarity
8917RP-TNC-female / RP-TNC-female$4.00
rp-tnc-2 rp-tnc-female

RP-TNC Male Crimp-On Connectors

ImageSKUDescriptionPriceBuyhf:att:pa_coax-typehf:att:pa_connector-attribute
RP-TNC-male, cable end, crimp-on, for RG-174, RG-178, RG-188, and Belden 8216 coaxial cable. (P/N: 8900-174)
8900-RPTNC-174RP-TNC-male, cable end, crimp-on, for RG-174, RG-178, RG-188, RG-196, RG-316, LMR-100A, and Belden 8216 coaxial cable. Crimp termination for the following coax types: RG-174 RG-178 RG-188 RG-196 RG-316 LMR-100A Belden 8216 Materials: Nickel plated, brass body Delrin dielectric Gold plated pin  $3.00
belden-8216 lmr-100a rg-174 rg-178 rg-188 rg-196 rg-316reverse-polarity
RP-TNC-male, cable end, crimp-on, nickel / Delrin for RG-8, RG-213, LMR-400, and Belden 9913 size coaxial cable. (P/N: 8900-400)
8900-RPTNC-400RP-TNC-male, cable end, crimp-on, nickel / Delrin for RG-8, RG-11, RG-83, RG-213, RG-214, RG-393, LMR-400, Belden 8237, Belden 8267, Belden 8268, Belden 9011, and Belden 9913 coaxial cable. Crimp termination for the following coax types: RG-8 RG-11 RG-83 RG-213 RG-214 RG-393 LMR-400 Belden 8237 Belden 8267 Belden 8268 Belden 9011 Belden 9913 Materials: Nickel plated, brass body Delrin dielectric Gold plated pin  $3.00
belden-8237 belden-8267 belden-8268 belden-9011 belden-9913 lmr-400 rg-8 rg-11 rg-83 rg-213 rg-214 rg-393
RP-TNC-male, cable end, crimp-on, for RG-142, LMR-195, LMR-200, RG-316, RG-400, RG-58, and Belden 7807 coaxial cable. (P/N: 8900-58)
8900-RPTNC-58RP-TNC-male, cable end, crimp-on, for RG-142, LMR-195, LMR-200, RG-400, RG-58, and Belden 7807 coaxial cable.$3.00
belden-7807 belden-8219 belden-8259 lmr-195 lmr-200 rg-58 rg-58au rg-142 rg-400reverse-polarity
RP-TNC-male, cable end, crimp-on for RG-223 RG-59 LMR-240 and RG-8X mini 8 (P/N: 8900-8X)
8900-RPTNC-8XRP-TNC-male, cable end, crimp-on, Nickel / Delrin for RG-6, RG-223, RG-59, RG-62, RG-8X, RG-316, LMR-240, Belden 7916A, Belden 8241, and Belden 9258 coaxial cable.$3.00
belden-7916a belden-8241 belden-9258 lmr-240 rg-6 rg-8x-mini-8 rg-59 rg-62 rg-223 rg-316reverse-polarity

RP-TNC Female Crimp-On Connectors

ImageSKUDescriptionPriceBuyhf:att:pa_coax-typehf:att:pa_connector-attribute
RP-TNC-female, cable end, crimp-on for RG-223 RG-59 LMR-240 and RG-8X mini 8 (P/N: 8906-8X)
8906-RPTNC-8XRP-TNC-female, cable end, crimp-on, Nickel / Delrin for RG-6, RG-223, RG-59, RG-62, RG-8X, RG-316, LMR-240, Belden 7916A, Belden 8241, and Belden 9258 coaxial cable.$3.00
belden-7916a belden-8241 belden-9258 lmr-240 rg-6 rg-8x-mini-8 rg-59 rg-62 rg-223 rg-316reverse-polarity

Crimp Tools and Die Sets

ImageSKUDescriptionPriceBuy
RG-174 & RG-58 Interchangeable Die for standard ratcheting crimper tools (P/N: 7505-DIE-174) - Max-Gain Systems, Inc.
7505-DIE-174RG-174 & RG-58 Interchangeable Die for standard ratcheting crimper tools (.213″, .197″, .178″, .128″, .068″, .042″ Hex Dies) Crimps most common two and three piece connectors that fit the following coax types and sizes: RG-142, LMR-110, ,RG-174, RG-178, RG-188, RG-196, Belden 8216, LMR-200, RG-316, RG-400, RG-58, and Belden 7807. Use the .213 Hex Die for crimping the rear ferrule to the following coax types: RG-58                   Belden 9201 RG-58A/U           Belden 8219 LMR-195             Belden 8259 LMR-200 RG-142 RG-400                Belden 7807 Use the .128 Hex Die for crimping the rear ferrule to the following coax types: RG-174                Belden 8216 LMR-100             LMR-100A LMR-110 RG-178 …$14.95
LMR-400 & RG-213 Interchangeable Die for standard ratcheting crimper tools P/N: 7505-DIE-400 - Max-Gain Systems, Inc.
7505-DIE-400LMR-400 & RG-213 Interchangeable Die for standard ratcheting crimper tools (.100″, .128″, & .429″ Hex Dies) Crimps most common two and three piece connectors that fit the following coax types and sizes: RG-8/U, RG-11, RG-83, RG-213/U, RG-214/U, LMR-400, and Belden 9913. Use the .429 Hex Die for crimping the rear ferrule to the following coax types: RG-8                   Belden 8237 Belden 8214   Belden 9913 RG-11                Belden 9011 RG-213              Belden 8267 RG-214              Belden 8268 LMR-400 RG-393              RG-83 For use in the 7505-HANDLE Crimp Tool Frame$14.95
RG-58 & RG-59 Interchangeable Die for standard ratcheting crimper tools P/N: 7505-DIE-8X - Max-Gain Systems, Inc.
7505-DIE-8XRG-58 & RG-59 Interchangeable Die for standard ratcheting crimper tools (.052″, .068″, .100″, .213″, and .255″ Hex Dies). Crimps most common two and three piece connectors that fit the following coax types and sizes: RG-6, RG-142, LMR-195, LMR-200, RG-223, RG-316, RG-400, RG-58/U, Belden 7807, RG-59/U, Belden 8214, Belden 8218, Belden 8281, RG-62, LMR-240, and RG-8X Mini 8 coaxial cable. Use the .255 Hex for crimping the rear ferrule to the following coax types: RG-8X                  Belden 9258 RG-59                  Belden 8241 RG-6                    Belden 7916A LMR-240 LMR-300 RG-62                  RG-223 Use the .213 Hex for crimping the rear ferrule to the following coax types: …$14.95
7505-HANDLE Crimp Handle Set Frame ONLY Professional Ratcheting Crimp Tool - Max-Gain Systems, Inc.
7505-HandleProfessional Ratcheting Crimp Tool (Frame ONLY) handle set that accepts die sets with a maximum width (at the point of attachment) of 0.235″. THE Standard in ratcheting crimp tools. RATCHETING CRIMPER DESIGN: This crimper’s ratcheting action requires only a fraction of the strength and effort it takes to use a non-ratcheting crimper as it captures and restrains the applied force with each “click” of the ratchet. The crimp tool crimps the top and bottom of the item being crimped simultaneously which ensures crimps consistently make a cold weld between the wire and barrel of the connector, or braid and body …$29.95