4-in-1 Modular Paddle Kits


PLEASE NOTE! This product is “Modular” and DOES NOT come with a T-Grip. If you need a version with T-Grip handle, please see our “Standard Paddle Kits

These DIY anchor kits allow you to build an add-on paddle for use with our modular Shallow Water Anchor system kits. Our 4-in-1 paddle has multiple uses, such as an emergency paddle, a lure retriever, a decoy retriever, and an obstacle push off / push pole. Just match the diameter (3/4″ or 1″) and color (Black, White, or Camo) of your fiberglass!

DIY 4-in-1 Modular Paddle Kits

DIY 4-in-1 modular Paddle kits are the perfect way to add capability to your Modular Shallow Water Anchor and/or a great addition to your boat. With superior materials comes added durability and reliability. Fiberglass is one of the most perfect materials for the boating industry as it does not rust, is lightweight, UV resistant, and very durable. The 4-in-1 paddle adds a lot of capability to any boating setup as it has ribs for added strength, two channels for lure and decoy retrieving, and a jagged/curved end for use as a push pole. This is the most capable system on the market.

Being a kit, some assembly is required. This system uses parts of our Shallow Water Anchor System. All is detailed in our Assembly Instructions:

Step-by-Step Installation Guide


Don’t have a Max-Gain Systems DIY Anchor system? Add capability to your existing anchor!

Follow these steps:
1.) Measure the diameter of your anchor rod
2.) Go to this link Make your current anchor modular
3.) select your rod diameter and Add to your Cart both a Male and Female Coupler
4.) You will need a fine toothed hacksaw OR an abrasive cut off wheel on an angle grinder or in a miter saw. Cut your current anchor about 6 inches below the handle (recommended location) or wherever you would like. (Be sure to make your cut straight)
5.) Use JB Weld Original Cold Weld Formula as shown in this Installation Guide
6.) Allow the epoxy to set and you have made your existing system into a modular system.

Additional information

Shipping Weight N/A
Shipping Dimensions N/A
Fiberglass Rod Diameter

3/4 inch OD, 1 inch OD


Black, White, Camo

Standard or Modular


You may also like…

  • Gaff Hook Pole DIY Kit GK-BASE (Black, 1 inch OD) 800x800 - Max-Gain Systems Inc

    Gaff Hook Pole DIY Kits

    SKU: GHK-BASESelect options
  • A SWA 8 ft 0.625 inch BLACK CLIP SQ 800x800 - Max-Gain Systems, Inc.

    DIY Shallow Water Anchor Part Kits

    SKU: SWASelect options
  • T-Grips for Shallow Water Anchors - Max-Gain Systems, Inc.

    T-Grips for Shallow Water Anchors

    SKU: MGS-TGRIPSelect options
  • SWA-EXT BLACK 1 inch DIY Shallow Water Anchor Extensions for 1 inch Rod (BLACK) - Max-Gain Systems, Inc.

    DIY Shallow Water Anchor Extension Kits (Modular)

    SKU: SWA-EXTSelect options

Customers who viewed this item also viewed…

  • MRODCPL Male 1 inch ID and 3/4 inch ID Rod and Tube Couplings

    Stainless Steel Coupler Parts for Fiberglass Round Solid Rod and Tube

    SKU: MGS-RODCPLSelect options
  • Stainless Steel Shallow Water Anchor Tips MGS-SSTIP 800x800 - Max-Gain Systems Inc

    Stainless Steel Shallow Water Anchor Tips

    SKU: MGS-SSTIPSelect options
  • RSR-1 1 inch OD Round Solid Rod 800x800 - Max-Gain Systems, Inc.

    1″ OD Fiberglass Round Solid Rod

    SKU: RSR-1Select options
  • RSR-34W .75 inch OD Round Solid Rod 800x800 - Max-Gain Systems, Inc.

    3/4″ OD Fiberglass Round Solid Rod

    SKU: RSR-34Select options