Max-Gain Systems fiberglass telescoping masts were used
to attain the desired height to produce this beautiful photograph
Why use Max-Gain Systems pultruded fiberglass tube and rod over other materials?
1. Telescoping FiberglassMax-Gain Systems round fiberglass tube and rod is designed to be able to sleeve with close tolerances. |
|
2. UV & Corrosion ResistantResists harmful UV rays which may damage other products. (We use a high percentage of UV inhibitor with our isopthalic polyester resins.) Made of Fiberglass Reinforced Plastic, our tube and rod is highly resistive to many common solvents, acids, and environments. |
|
3. Flexible & High StrengthIn high wind, our pultruded fiberglass will flex without cracking. Hundreds of strands of glass fibers combine with resin to form a superior and longer lasting product. |
|
4. Electrically Non-ConductiveElectrically non conductive material that is perfect in sensitive applications. We use "E-Glass" in our tubes and rods (best electrical properties). |
|
5. RF and EM TransparentMax-Gain Systems fiberglass is used in more antenna manufacturing than any other manufacturer as it exhibits excellent properties at radio frequencies. Max-Gain Systems fiberglass is electromagnetically transparent allowing use around and in electromagnetically sensitive applications. Max-Gain Systems fiberglass is perfect for, but not limited to: cellular, radio, Wi-Fi, and Wi-Max applications. |
|
6. Variety with ConsistencyInnovative material allows you to manipulate it in many ways to fit your purpose and need. Rainbow of colors available in quantity. Please inquire. |
|
7. Easily Fabricated and Easy to InstallMax-Gain Systems fiberglass is easily fabricated using proper tools with carbide, diamond, or abrasive tip blades. Max-Gain Systems fiberglass is a lighter weight material allowing for ease of installation and less risk of injury or fatigue. |
|
8. Highest Quality manufactured in the U.S.A.
|
Telescoping Masts
Announcing Max-Gain Systems, Inc.’s line of heavy duty (1/8 inch thick wall on all tubes … not the thin walled “glorified fishing poles” sold by some) … fiberglass push-up masts! Max-Gain System’s fiberglass telescopic masts provide the perfect platform to raise a multitude of different types of antenna to the required height. They are commonly used for mobile, temporary or even semi-permanent deployment of equipment.
We currently offer eleven versions of our mast kits, from our 50 foot (maximum extended length) model MK-8-HD, to our “most popular” (and our staff’s favorite) model MK-6-HD, to our 10.6 foot model MK-2-Standard. Between these models, we offer a wide range of sizes and combinations ideal for a great many uses! These packages each contain the fiberglass tubes (MK-8 series has 93 inch long tubes, MK-6 series has 72 inch long tubes, MK-4 series has 46.5 inch long tubes, and MK-2 series has 23 inch long tubes) plus all sizes of our Quik-Clamps needed for your model, at a package discount price. (Guy rings and guy rope sold separately.) We also offer our 93 and 46.5 inch lengths of fiberglass tube “by-the-piece”, and sell our Quik-Clamps individually, so you can create your own custom mast, perfect for your particular use!
Reviews on eHam.net
- Reviews of this mast system
- Reviews of our company in general (not just this mast system)
Max Length
Min Length
Length of Tubes
OD (Bottom)
OD (Top)
Number of Sections
Weight (lb)
SKU
Pricing
Purchase
Want to see how easy it is to assemble? View our Assembly and Use Guide
Painter’s Pole and Extension Pole Products
Key Features:
- Lighter, stronger, more durable.
- Adjustable to any length, just flip the lever forward, extend to desired length, and flip the lever back to lock the pole in position.
- Positive lock prevents movement or rotation and is adjustable for tension.
- Universal threaded nylon tip for maximum strength. (sold separately and available in many different configurations).
- Patented Cam-Lock tips securely hold roller to prevent loosening (sold separately).
- Available in 2-section or 3-section configuration.
- 3-section poles offer compact storage sizes yet longer length than comparable 2-section poles.
- 3-section poles are stiffer than regular 2-section poles so you can apply more roller pressure with less “bounce”.
- Lighter weight, easier to use.
- No sloppy joints.
- Sold as “KITS” to allow for the ability to add sections if you choose.
2-Piece Painter Poles
Max Length
Min Length
Minimum Overlap of Tubes
Length of Tubes
OD (Bottom)
OD (Top)
Weight (lb)
SKU
Pricing
Purchase
3-Piece Painter Poles
Max Length
Min Length
Minimum Overlap of Tubes
Length of Tubes
OD (Bottom)
OD (Top)
Weight (lb)
SKU
Pricing
Purchase
Want to see how easy it is to assemble? View our Assembly and Use Guide
Custom Mast Configurations and Replacement Parts
Depending on the height and load bearing capability you are trying to achieve, you can order this system “by the piece.” (Fiberglass is sold “by the piece” in 93 inch, 46.5 inch, and 23 inch lengths only.) Please see our fiberglass individual piece pricing.
For example: If you needed 22ft. with high load bearing capability you could order the 2.5″ tube, 2.25″ tube, 2″ tube and the 2 corresponding “Quik-Clamps,” the stock numbers MC-2.5 and MC-2.25, to achieve the desired height.
If you needed a 22ft., light, highly portable system to hold up light things, you could use the 1 1/4″ tube, 1″ tube, 3/4″ tube, and the 2 corresponding “Quik-Clamps,” the models MC-1.25 and the MC-1. This selection would allow some flexibility at the top while being light and easily movable.
Please note: Our “Quik-Clamp” stock numbers are based on the LARGER of the two associated tube sizes. For example, if you want the clamp that sits on a 1″ OD tube and accepts a 3/4″ OD tube internally, order the MC-1 size. If you want the clamp that sits on the 1.25″ OD tube and accepts internally the 1″ OD tube size, order the MC-1.25 size.
Quik-Clamps
Each “Quik-Clamp” includes one stainless screw unless noted upon ordering that you would like a glass filled fiber screw.
Image
Product
Pricing
Purchase
Replacement Screws and Levers
Image
Product
Description
Pricing
Purchase
Stainless Steel Clamp Screw for Max-Gain Systems' "Quik-Clamp" line
$2.25
Guy Rings by the Piece
We now have custom made guy rings, manufactured specifically for our mast systems! These guy rings are machined from mineral-filled acrylic, a material which is non-metallic, non inductive, non-conductive, impervious to UV, and very strong. We have seven sizes available, each made to fit perfectly over our fiberglass tubes of the same size. They will not scar the fiberglass surface. They slip freely on the fiberglass tubes, and rest on top of the “Quik-Clamp” below. (For example, the 3/4 inch size fits on our 3/4 inch OD tube, and will rest on top of our MC-1 Quik-Clamp, which is installed at the top end of the 1 inch OD tube.) Each guy ring has 5 drilled and counter-sunk holes for your guy rope, allowing you to select either 3 point OR 4 point guying! The counter-sunk holes will not cut guy ropes with sharp edges. Smaller two sizes accept guy rope diameter of 3/16 inch maximum. Larger four sizes accept guy rope diameter of ¼ inch maximum. Colors vary. (Our selection.)
Image
Product
Description
Pricing
Purchase
Guy Rings are a crucial part of any vertical structure. Each guy ring is sold separately or at a discount in one of our guy ring sets. Sets are a quick, easy, and cheaper way to get all of the guy points needed for your mast for any situation.
$5.95
Guy Rings by the Set
Save money by purchasing one of our recommended sets.
Image
Product
Description
Pricing
Purchase
Guy Rings by discounted sets. Many sets available. Most requested sets:
- GR-SET-3 for (STD) Standard Duty Masts
- GR-SET-6 for (HD) Heavy Duty Masts
- GR-SET-7 for (EXT) Heavy Duty Extended Masts
- GR-SET-8 for (UHD) ULTRA Heavy Duty Extended Masts
Guy Rope
Black Dacron, double weave, stretch resistant, highly UV resistant rope. Note: 1 hank of 200 feet will guy the top guy ring of a MK-8-HD if using 3 point guying.
Image
Product
Description
Pricing
Purchase
200 Foot Hank, 1/8 inch, Black Dacron, double weave, stretch resistant, highly UV resistant rope. One full, continuous length.
$27.95
1000 foot Spool, 1/8 inch, Black Dacron, double weave, stretch resistant, highly UV resistant rope. One full, continuous length. This is to be cut into custom lengths for guying your mast.
$99.95
Guying Rope Tensioners
These Rope Line Tensioners are the perfect solution for quickly guying your mast or easily putting up your wire antennas, such as dipoles. Frequently called Rope Line Tighteners these are great for mobile/quick installations and for permanent setups.
Image
Product
Description
Pricing
Purchase
Threaded Tips for Attachments and Extensions
Introducing patented Cam-LockT threaded tips
These tips are standard painter’s pole thread with a patented twist. The thread is tapered toward the base. Being tapered allows your attachments to lock in place allowing you the peace of mind that your attachment will not begin to unscrew and fall off.
Make your own Extension Poles
Make your own extension poles using any length of 1 inch tube with a male threaded tip and a female threaded coupler
Make your own Painter’s Poles
Fiberglass painter’s poles with threaded tip (sold separately).
Painter’s Pole Male Couplers
Image
Product
Description
Pricing
Purchase
Nylon Replacement Painter's Pole Male Attachments. Make selections from the drop-downs to see full specifications on each part. Fits on: Select the outer diameter of your tube, rod, dowel, or painters pole you would like to put this tip on with. Neck Type: Choose the length and type of neck
Painter’s Pole Female Couplers
Image
Product
Description
Pricing
Purchase
Painter's Pole Coupler - 3/4x5 Acme threaded female to rod (or tube) blank.
Make selections from the drop-down menus to see full specifications on each part.
Fits On: Select the outer diameter of the tube or rod that the coupling will fit on the end of.
$5.95
Camera Adapter
Image
Product
Description
Pricing
Purchase
Mount your camera on top of our mast systems or our painter's poles using our all Stainless Steel mount. It has the strength to give you the confidence that your equipment is safe while elevated.
Select below the Outer Diameter of the tube that you have to put the mount on.
For HD masts, choose 1" (CM-1)
For STD and EXT masts, choose 3/4" (CM-34)
Clips
Image
Product
Pricing
Purchase