All of our mounts are made in the USA, using marine grade aluminum with a perfect powder coat. Your choice of White or Black. Lock the back of the boat in place. Our Transom Mount / Stern Mount is designed to fit on any 15 degree transom. Made from thick gauge aluminum and built to keep your boat steady from the heavy torque that wind, current, and wake can put on a boat.
Designed with nylon bushings with an inner diameter of 0.98 inches, these will accept all 3/4 inch pole anchors including our modular 3/4 inch OD rod anchors. Our modular anchors utilize stainless steel couplings that are machined from solid bar stock and measure 0.825″ in outer diameter. These fit perfectly through our Transom Mounts and Stern Mounts. The bushings have an added benefit in that they wont scratch up your shallow water anchor increasing the usage life of your anchoring system.
Vertical Tube Length: 8.75 in / 222.25 mm
Inner Diameter of Shallow Water Anchor Hole: 0.98 in / 24.89 mm
Mounting Plate Max Width: 3 in / 76.2 mm
Mounting Plate Max Height: 4.375 in / 111.125 mm
Mounting Plate Hole Diameter: 0.268 in / 6.8 mm (4 holes)
Powder Coat Color: BLACK
Weight: 22.6 oz / 648 g
Transom Mount Flange Drilling Diagram / Template
For use with the following products:
About Max-Gain Systems, Inc.
Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.
Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge, and we can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…