This kit includes:
1x MGS-MRODCPL-01 3/4 inch Rod, Male Threaded 3/8″ x 24 Stainless Steel Coupler
1x MGS-SSTIP-01-F38THREADED Stainless Steel Threaded Tip for 3/8″ x 24 Couplers
Threaded stainless steel hard soil tips & 3/8 x 24 Male Threaded Coupler Combo that accept 3/4″ Round Solid Rods for Shallow Water Anchors. For direct use with Max-Gain Systems, Inc. Shallow Water Anchor Kits. Be sure to checkout ALL of our Shallow Water Anchor products and information at the very informative Shallow Water Anchor page.
The best adhesive to use to attach the painters pole attachments to then ends of the fiberglass tubing (or any tube or rod that is smaller than the ID these will accept) is JB Weld, Original Cold-Weld Formula. Mix the epoxy then apply a generous layer around the end of the tubing or rod. Slide on the coupling and allow time to set.
One additional method could be used and that is the “pinning” method. Place the part on the end of the tube or rod. With the part “seated” drill a 9/64″ hole through the overlap area. Insert a #6:32 machine screw of the corresponding length to the largest diameter piece being drilled. An illustration of this method is below:
About Max-Gain Systems, Inc.
Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.
Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries. Including but not limited to: marine / boating, aeronautical, fabric reinforcement, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge. We can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…