316 Stainless Steel Pulley Kit

$24.95

Stainless Steel: 316

Weight Handling: Recommended for hauling light loads like wire antennas. Not for uses involving life or safety.

Rope accepted: 5/32″ thru 1/4″. Our 1/8″ Black Dacron Rope is perfect for use with these pulleys.

SKU: PULLEY-01-K Categories: ,

316 Stainless Steel Pulley. The maximum load of this pulley FAR exceeds the weight capacity of our mast system. This pulley can accept rope up to 1/4 inch in diameter, but is perfect for use with our 1/8 inch Black Dacron rope. The roller and body are very close in tolerance to not allow the rope to migrate off the roller. Use this pulley to help hoist light weight objects to the top of your mast such as wire antennas.

Installation

Step 1:

PULLEY-01-K install 1 - Max-Gain Systems, Inc.
Mark your Tube and Rod, with a maximum outer diameter of 1 inch, 1 inch down (or in) from the end.

Step 2:

PULLEY-01-K install 2 - Max-Gain Systems, Inc.
Drill a 3/16″ hole all the way through. Be sure not apply much force to the drill. Let the drill bit eat its way through slowly and deliberately. If too much force is applied you can “punch-through” the other side instead of having a nice clean hole.

Step 3:

PULLEY-01-K install 3 - Max-Gain Systems, Inc.
Insert the 3/16″ I-Bolt. If it does not slide in freely, screw it into place until the nut seats flush to the tube. Screw on the nylon lock washer on the rear side.

Step 4:

PULLEY-01-K 316 Stainless Pulley Kit 800x800 - Max-Gain Systems, Inc.
Attach the shackle and pulley. Unscrew the shackle and push the shackle through the I-Bolt. It could be a tight fit, but it will fit. With the shackle still open put on the pulley. Screw the shackle screw back in and it will be ready to operate.

About Max-Gain Systems, Inc.

Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.

Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries. Including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge. We can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…

PULLEY-01-K

Additional information

Shipping Weight 1.4 oz
Shipping Dimensions 2.38 × 1.38 × 0.5 in
itemCondition