1-1/2″ OD, 1″ ID, 1/4″ Wall Fiberglass Round Tube, Gray
Our 1-1/2″ OD, 1″ ID, 1/4″ Wall, fiberglass tube is made by the pultrusion process. Fiberglass (random directional) mat, pulled via hydraulics through a bath of resin and pigment. Heated and cured. Our stock lengths are the perfect sizes to ship via standard parcel carriers like FedEx and Post. 93 inch long lengths fit under the oversize 3 shipping mark. Oversize 3 goods (anything over 94 inches) will all ship at freight rates which start at $150 and rise from there making our lengths of tube perfect for prototyping, hobbyist, etc…
This listing contains all of the product offerings for the 1-1/2″ OD, 1″ ID, 1/4″ Wall, Round Tube including: RT-112-QTR-05, RT-112-QTR-2, RT-112-QTR-4, and RT-112-QTR-8
Round Tube Typical Properties
MGS Fiberglass Sizes that sleeve 1-1/2″ OD, 1″ ID, 1/4″ Wall, Round Hollow Tube:
1 inch OD Round Solid Rod fits inside our 1.5 inch OD x 1/4 inch WALL Round Hollow Tube (full length sleevable)
1 inch OD Round Hollow Tube fits inside our 1.5 inch OD x 1/4 inch WALL Round Hollow Tube (full length sleevable)
1 inch OD x 1/4 inch WALL Round Hollow Tube fits inside our 1.5 inch OD x 1/4 inch WALL Round Hollow Tube (full length sleevable)
1.75 inch OD Round Hollow Tube fits over our 1.5 inch OD x 1/4 inch WALL Round Hollow Tube (full length sleevable)
2 inch OD x 1/4 inch WALL Round Hollow Tube fits over our 1.5 inch OD x 1/4 inch WALL Round Hollow Tube (full length sleevable)
1.75 inch On-Side Square Hollow Tube fits over our 1.5 inch OD x 1/4 inch Wall Round Hollow Tube (TIGHT FIT – Only sleeves 6 to 12 inches)
2 inch On-Side x 1/4 inch Wall Square Hollow Tube fits over our 1.5 inch OD x 1/4 inch Wall Round Hollow Tube (TIGHT FIT – Only sleeves 6 to 12 inches)
Attachments that fit-on, fit-in, clamp-on, couple, etc…
The 1.50 inch Tube and Rod Storage Clip accepts our 1.50 inch OD Round Solid Rod and holds it with a snug grasp. Multiple may be needed for long items.
The 1.5 inch Guy Ring has a center hole to fit around 1.5 inch OD Round Hollow Tube or 1.5 inch OD Round Solid Rod
The 1.5 inch Stainless Steel, Threaded, Tube and Rod Coupler has open ends to fit over the 1.5 inch OD Round Hollow Tube.
Round Tube Sleeving and Reinforcement
Mounts to the ground, walls, vehicles, etc…
The 1.5 inch ID Wall Mount can be used to attach 1.5 inch OD x 1/4 inch Wall Round Tube to a wall.
Round Tube Sleeving Sample Pack
This Round Tube is available in a Round Sleeving Tube Sample Pack for easier product evaluation. Easily acquire a 6 inch or 23.25 inch long piece of each size of Round Fiberglass Tube.
Round Tube 1/4 inch Wall Sample Packs
This 1/4 inch WALL Round Tube is available in a Round Sleeving Tube Sample Pack for easier product evaluation. Easily acquire a 6 inch or 23.25 inch long piece of each size of 1/4 inch WALL Round Fiberglass Tube.
Please note: The sleeving and reinforcement guide below is for Max-Gain Systems’ proprietary line of tube and rod only. All sizes are “nominal” and allow a few thousandths for sleeving purposes.
These same stated sizes of tube and rod from other manufacturers probably will NOT mate with our line!
Accepted Inside Sizes
Accepted Outside Sizes
no direct sizes
no direct sizes
no direct sizes
no direct sizes
no direct sizes
Fiberglass Information and Resources
JOINING / CONNECTING
Joining and connecting tubes and rods together through many different methods. Find out which method works for you!
CUTTING / DRILLING
Information on cutting and drilling fiberglass tube and rods. Including which tools work best!
BONDING / ADHESIVES
Information on bonding fiberglass shapes together thru chemical adhesion. Including what NOT to use!
PAINTING / COATING
Information on painting fiberglass tube and rods. Best practices and tips on how to make it less visible.
We offer telescoping, Quad Spreaders with usable lengths up to a total of 26 feet! Telescoping Quad Spreaders are discounted from individual piece prices! See our Quad Spreader Information Sheet for details.
Buying ten or more quantity of one size of fiberglass qualifies for a 10% quantity discount on that item. Fifty or more, of one size, qualifies for 15%, and one hundred or more 20%.
If you are a reseller or manufacturer, you may qualify for our factory-direct, wholesale/O.E.M. pricing! SUBSTANTIAL savings are possible with increasing volume, and our customer service is unsurpassed. Email us for quantity pricing.
Available free by telephone. For almost unlimited life, we highly recommend that any fiberglass – even ours which is UV-stabilized – be painted. A sprayed primer coat and flat-black top coat, works best. (See our Max-Tips Info Sheet for details.)
About Max-Gain Systems, Inc.
Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.
Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries. Including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge. We can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…
RT-112-QTR-8, RT-112-QTR-4, RT-112-QTR-2, RT-112-QTR-05