All of our mounts are made in the USA, using marine grade aluminum with a perfect powder coat. Your choice of White or Black. Lock the back of the boat in place. Our Motor Mounts attaches to the standard motor mount bolt configuration. When combined with a bow mount, this helps to keep the stern from swinging around and keeps you sitting still and quiet. This is also a great mount for pontoon boat motor mounts. With an off-set from the motor of 8-9 inches, this mount is more capable to allow full motor movement on some boats. Made from thick gauge aluminum and built to keep your boat steady from the heavy torque that wind, current, and wake can put on a boat.
Designed with nylon bushings with an inner diameter of 0.98 inches, these will accept all 3/4 inch pole anchors including our modular 3/4 inch OD rod anchors. Our modular anchors utilize stainless steel couplings that are machined from solid bar stock and measure 0.825″ in outer diameter. These fit perfectly through our Motor Mounts, Arched Deck Mounts and Bow Mounts. The bushings have an added benefit in that they wont scratch up your shallow water anchor increasing the usage life of your anchoring system.
-Perfectly Powder Coated in Black or White
-Polymer Bushings fit any 3/4″ Pole INCLUDING the stainless steel couplers of our modular anchor kits.
-Made out of marine grade aluminum
Mounting Hole Layout Diagram / Template
For use with the following products:
About Max-Gain Systems, Inc.
Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.
Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge, and we can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…
