28.5 feet Heavy Duty Extended Fiberglass Push-up Mast MK-4-EXT
*All masts are kits and some assembly is required*
**All masts are kits and include fiberglass tubes and corresponding quik-clamps**
The MK-4 Series of masts are, by far, our most portable masts for many reasons. The masts are light weight and short enough, when fully collapsed, to manipulate the quik-clamps from the ground. This mast will get you above most obstacles to achieve maximum height, line-of-sight, maximum gain, and the best reception. Our masts are completely adjustable along the entire length of each tube. The MK-4 Series of masts are perfect for most portable applications.
See the photo gallery to see dozens of pictures, all taken by customers, of our mast systems being used for a number of different applications.
Maximum Usable Length (Height): 28.5 feet
Length when sleeved: 5 feet and 8 inches
Minimum overlap of tubes: 4.25 inches
Length of Tubes: 46.5 inches
Outer Diameter of Bottom Section: 2.5 inch
Outer Diameter of Top Section: 3/4 inch
Total Number of Sections: 8
Weight (when assembled): 12.75 pounds
Accessorize your mast for the greatest effectiveness
About Max-Gain Systems, Inc.
Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.
Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge, and we can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…