All of our mounts are made in the USA, using marine grade aluminum with a perfect powder coat. Your choice of White or Black. Lock the back of the boat in place. Our Arched Deck Mount / Bow Mount attaches to any deck. Most commonly used on the forward deck and hang the shaft over the side and against the gunnel. When combined with a stern mount, this helps to keep the bow from swinging around and keeps you sitting still and quiet. This is also a great mount for pontoon boat decks off any side you want. With an arch rise of 5.5 inches, this mount is more capable to clear mounted rails on some boats. Made from thick gauge aluminum and built to keep your boat steady from the heavy torque that wind, current, and wake can put on a boat.
Designed with nylon bushings with an inner diameter of 0.98 inches, these will accept all 3/4 inch pole anchors including our modular 3/4 inch OD rod anchors. Our modular anchors utilize stainless steel couplings that are machined from solid bar stock and measure 0.825″ in outer diameter. These fit perfectly through our Arched Deck Mounts and Bow Mounts. The bushings have an added benefit in that they wont scratch up your shallow water anchor increasing the usage life of your anchoring system.
Deck Mount Flange Drilling Diagram / Template
For use with the following products:
About Max-Gain Systems, Inc.
Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.
Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge, and we can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…
