Mast Wall Mount Bracket


Mast Wall Mount Bracket to mount your round tube and rod to a wall.

Diameter Clamped: Select the Outer Diameter (OD) of the round tube or rod that you want to mount:


Mast Wall Mount Bracket for use with 2.5 inch OD round tube and rod down to 1 inch OD round tube and rod. select the out diameter of the round tube or rod that you are trying to mount from the drop down selection menu. We have two types of this mount. One for the smaller diameters and one for the larger diameters.

If the diameter of what you are trying to clamp is an in between size (example: 1-5/8 OD) then select the adjacent larger size from the drop down menu. In our example of 1-5/8 inch OD you would select 1-3/4 inch OD.

These antenna mast wall mount brackets are made of galvanized steel making them extremely strong. The third leg, used by the bottom bracket of the pair, should always be pointed down to assist in spreading the load that the mast would be exerting on the wall or structure. These mast wall mount brackets are simple to assemble and to adjust.

See the link below to an article on our blog about using these mounts to install a mast.

A Wall Mount Installation

About Max-Gain Systems, Inc.

Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.

Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge, and we can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…

Additional information

Shipping Weight N/A
Shipping Dimensions N/A
Diameter Clamped

1 inch OD, 1-1/4 inch OD, 1-1/2 inch OD, 1-3/4 inch OD, 2 inch OD (STD Masts), 2-1/4 inch OD, 2-1/2 inch OD (HD and EXT Masts)


You may also like…

  • Truck Drive-On Mast Mount - Max-Gain Systems, Inc.

    Drive-On Base Mast Mount Kit

    SKU: MOUNT-DRVSelect options
  • Tripod Mast Mount 800x800 - Max-Gain Systems Inc

    Tripod Mast Mount

    SKU: M-TRIPOD-KAdd to cart
  • M-C25HDTCH23-K 2.5 inch Support Tube Tilt Cross 23 inch Hitch Bar 800x800

    Mast Mount “GO ALL OUT” Combo

    SKU: MOUNT-GAOSelect options
  • Heavy Duty mast partially raised on a hitch mount for mounting a heavier antenna

    Trailer Hitch Mast Mount Kit

    SKU: MOUNT-HTCHSelect options