I-Bolt Kit


316 Stainless Steel I-Bolt Kit

1x 316 Stainless Steel 3/16″ I-Bolt
1x 316 Stainless Steel Hex Nut
1x 316 Stainless Steel Locking Hex Nut

SKU: 316-IB-K Categories: ,

I-Bolt Kit for use with our Fiberglass Mast Systems.

3/16″ Eye Bolt, Hex Nut, & Nylon Lock Nut Kit, Stainless Steel


Step 1:

PULLEY-01-K install 1 - Max-Gain Systems, Inc.
Mark your Tube and Rod, with a maximum outer diameter of 1 inch, 1 inch down (or in) from the end.

Step 2:

PULLEY-01-K install 2 - Max-Gain Systems, Inc.
Drill a 3/16″ hole all the way through. Be sure not apply much force to the drill. Let the drill bit eat its way through slowly and deliberately. If too much force is applied you can “punch-through” the other side instead of having a nice clean hole.

Step 3:

PULLEY-01-K install 3 - Max-Gain Systems, Inc.
Insert the 3/16″ I-Bolt. If it does not slide in freely, screw it into place until the nut seats flush to the tube. Screw on the nylon lock washer on the rear side.

Use with a shackle and pulley to get an easy way to attach a pulley system to the top of your mast

About Max-Gain Systems, Inc.

Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.

Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries. Including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge. We can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…

Additional information

Shipping Weight 0.31 oz
Shipping Dimensions 2.07 × 0.63 × 0.419 in

You may also like…

  • Ground Base Mast Mount Kit with Tilt Mechanism fully assembled - Max-Gain Systems, Inc.

    Ground Base Mast Mount Kit

    SKU: MOUNT-GNDSelect options
  • 38 feet Heavy Duty Fiberglass Push-up Mast MK-6-HD 800x800 - Max-Gain Systems, Inc.

    38 feet Heavy Duty Fiberglass Push-up Mast MK-6-HD

    SKU: MK-6-HDSelect options
  • Tripod Mast Mount 800x800 - Max-Gain Systems Inc

    Tripod Mast Mount

    SKU: M-TRIPOD-KAdd to cart
  • PULLEY-01-K 316 Stainless Pulley Kit 800x800 - Max-Gain Systems, Inc.

    316 Stainless Steel Pulley Kit

    SKU: PULLEY-01-KAdd to cart

Customers who viewed this item also viewed…

  • Greenstone VHC-1 Vacuum Relay 800x800 - Max-Gain Systems Inc

    3.5 kV, 5 kV Peak, SPDT, 25 Amps, VHC-1 – NEW Vacuum Relay

    SKU: VHC-1Select options
  • 50 feet Heavy Duty Fiberglass Push-Up Mast MK-8-HD 800x800 - Max-Gain Systems, Inc.

    50 feet Heavy Duty Fiberglass Push-up Mast MK-8-HD

    SKU: MK-8-HDSelect options
  • RT-1 1 inch OD Round Hollow Tube 800x800 - Max-Gain Systems, Inc.

    1″ OD, 3/4″ ID Fiberglass Round Tube

    SKU: RT-1Select options
  • PL-259 UHF male Solder On for LMR-400, RG-213, RG-8 7500-UHF 800x800 - Max-Gain Systems Inc

    PL-259, UHF male Solder Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax

    SKU: 7500-UHFSelect options