Professional Ratcheting Crimp Tool (Frame ONLY) P/N: 7505-HANDLE

$29.95

Professional Ratcheting Crimp Tool (Frame ONLY) handle set that accepts die sets with a maximum width (at the point of attachment) of 0.235″. THE Standard in ratcheting crimp tools.

RATCHETING CRIMPER DESIGN: This crimper’s ratcheting action requires only a fraction of the strength and effort it takes to use a non-ratcheting crimper as it captures and restrains the applied force with each “click” of the ratchet. The crimp tool crimps the top and bottom of the item being crimped simultaneously which ensures crimps consistently make a cold weld between the wire and barrel of the connector, or braid and body of the connector, essentially eliminating damaged and distorted terminals or coax connectors.

Our Die sets will all fit (7505-DIE-174, 7505-DIE-400, 7505-DIE-8X, and 7505-DIE-PP). Phillips-head screwdriver required to install and change out die sets.

Use the .429 Hex Die for crimping the rear ferrule to the following coax types:

RG-8                   Belden 8237
Belden 8214   Belden 9913
RG-11                Belden 9011
RG-213              Belden 8267
RG-214              Belden 8268
LMR-400
RG-393              RG-83

Use the .255 Hex Die for crimping the rear ferrule to the following coax types:

RG-8X                  Belden 9258
RG-59                  Belden 8241
RG-6                    Belden 7916A
LMR-240
LMR-300
RG-62                  RG-223

Use the .213 Hex Die for crimping the rear ferrule to the following coax types:

RG-58                   Belden 9201
RG-58A/U           Belden 8219
LMR-195             Belden 8259
LMR-200
RG-142
RG-400                Belden 7807

Use the .128 Hex Die for crimping the rear ferrule to the following coax types:

RG-174                Belden 8216
LMR-100             LMR-100A
LMR-110
RG-178
RG-188
RG-196

Additional information

Shipping Weight 22 oz
Shipping Dimensions 9 × 3.2 × 0.75 in

You may also like…

Customers who viewed this item also viewed…