Square 90 Degree Fixed Angle Connectors for connecting, splicing, or repairing square tube of the corresponding sizes. These are made from fiberglass square bar. Perfect for an internal couple of two square tubes.
If using these fixed angle connectors in another manufacturer’s tubes, pay close attention to the on-side dimension for each connector which is listed once you make a nominal size selection. Additional fabrication maybe needed to use.
Many uses include, but not limited to:
- Hand Railings
- Frames
These connectors are routinely used with the following products but not limited to:
Assembly Tips
The best adhesives to use to attach the Angle connectors inside of square tubes are as follows. Some can be gotten at your local hardware store while others are more specialized and can be acquired at online retailers. JB Weld, Original Cold-Weld Formula is a hand mixed epoxy that comes in two individual tubes, on a blister pack, that can be purchased at all major hardware stores. Applying a generous layer around each leg of the connector THEN pressing it into the square tube will allow any excess to escape. Wipe off all excess quickly and be sure the surface underneith where you are working is covered against any drops of the adhesive as it begins to set up fairly quickly.
Ashland Pliogrip Urethane Adhesive is a construction adhesive that is available for industrial applications, but is THE BEST to adhering fiberglass together and other parts onto fiberglass that WE know of. Applying a generous layer around each leg of the connector THEN pressing it into the square tube will allow any excess to escape. Wipe off all excess quickly and be sure the surface underneath where you are working is covered against any drops of the adhesive as it begins to set up fairly quickly. NOTE! This product requires a special application tool. Becomes very economical for large use applications.
For a mechanical attachment method, a pinning method can be used. Place the part in the end of the tube. With the part “seated” drill a 9/64″ hole through the overlap area. Insert a #6:32 machine screw of the corresponding length to the largest diameter piece being drilled OR a rivet. An illustration of this method is below:
Wholesale Quantities & Assemblies
Large quantity (wholesale quantities), custom length, custom colors, and limited fabrication services available. Inquire and let us quote on your needs. Contact us with Tube or Rod, outer diameter, lengths, color request or stock color, and what fabrication services you may need (drilling holes through, angle cuts, chamfered ends, pencil points). Please also include your name, organization (if any), address, phone number, email address, and any other information you may wish to provide to help us better quote your needs. Save time and money by letting us deliver your assemblies ready for production. We can help you determine what rod or tube best meets your needs and determine a production time based on when the product is scheduled, any fabrications, etc…
About Max-Gain Systems, Inc.
Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge, and we can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…