Square Adjustable Angle Connectors

$28.95$36.95

Square Adjustable Angle Connectors for connecting, splicing, or repairing square tube of the corresponding sizes. These are made from fiberglass square bar. Perfect for an internal couple of two square tubes.

If using these angle connectors in another manufacturer’s tubes, pay close attention to the on-side dimension for each connector which is listed once you make a nominal size selection. Additional fabrication maybe needed to use.

On-Side: select the on-side dimension of the Square connector.

SKU: AHRC-ST-BASE-S-VM Categories: , ,

Square Adjustable Angle Connectors for connecting, splicing, or repairing square tube of the corresponding sizes. These are made from fiberglass square bar. Perfect for an internal couple of two square tubes. Adjustable from 90 degrees to 270 degrees. From straight to 90 degrees in either direction.

If using these angle connectors in another manufacturer’s tubes, pay close attention to the on-side dimension for each connector which is listed once you make a nominal size selection. Additional fabrication maybe needed to use.

Many uses include, but not limited to:

  • Hand Railings
  • Frames

These connectors are routinely used with the following products but not limited to:

Assembly Tips

1.5 inch On-Side Square Adjustable Angle Connectors AHRC-ST-150-S-VM and ST-2-QTR cut to 27.5 degree angles Assembled 800x800 - Max-Gain Systems Inc

1.5 inch On-Side Square Adjustable Angle Connectors AHRC-ST-150-S-VM Assembled 800x800 - Max-Gain Systems Inc

The best adhesives to use to attach the Angle connectors inside of square tubes are as follows. Some can be gotten at your local hardware store while others are more specialized and can be acquired at online retailers. JB Weld, Original Cold-Weld Formula is a hand mixed epoxy that comes in two individual tubes, on a blister pack, that can be purchased at all major hardware stores. Applying a generous layer around each leg of the connector THEN pressing it into the square tube will allow any excess to escape. Wipe off all excess quickly and be sure the surface underneith where you are working is covered against any drops of the adhesive as it begins to set up fairly quickly.

JB Weld Original Cold-Weld Formula, Steel Reinforced 2 part epoxy

Ashland Pliogrip Urethane Adhesive is a construction adhesive that is available for industrial applications, but is THE BEST to adhering fiberglass together and other parts onto fiberglass that WE know of. Applying a generous layer around each leg of the connector THEN pressing it into the square tube will allow any excess to escape. Wipe off all excess quickly and be sure the surface underneath where you are working is covered against any drops of the adhesive as it begins to set up fairly quickly. NOTE! This product requires a special application tool. Becomes very economical for large use applications.

Pliogrip 7779 Urethane Adhesive - Bonding raw fiberglass ends, sides and edges to many materials

Pliogrip 7779 Urethane Adhesive Applicator Tool - Max-Gain Systems Inc

For a mechanical attachment method, a pinning method can be used. Place the part in the end of the tube. With the part “seated” drill a 9/64″ hole through the overlap area. Insert a #6:32 machine screw of the corresponding length to the largest diameter piece being drilled OR a rivet. An illustration of this method is below:

Pinning Method

Wholesale Quantities & Assemblies

Large quantity (wholesale quantities), custom length, custom colors, and limited fabrication services available. Inquire and let us quote on your needs. Contact us with Tube or Rod, outer diameter, lengths, color request or stock color, and what fabrication services you may need (drilling holes through, angle cuts, chamfered ends, pencil points). Please also include your name, organization (if any), address, phone number, email address, and any other information you may wish to provide to help us better quote your needs. Save time and money by letting us deliver your assemblies ready for production. We can help you determine what rod or tube best meets your needs and determine a production time based on when the product is scheduled, any fabrications, etc…

About Max-Gain Systems, Inc.

Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries including but not limited to:  marine / boating, aeronautical, agriculture, construction, emergency services, etc….  We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge, and we can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…

Additional information

Shipping Weight N/A
Shipping Dimensions N/A
On-Side

1 Inch, 1-1/4 Inch, 1-1/2 Inch, 1-3/4 Inch

You may also like…

  • ST-150 1.50 inch On-Side Square Tube 800x800 - Max-Gain Systems, Inc.

    1-1/2″ On-Side Fiberglass Square Hollow Tube

    $12.23$82.74
    SKU: ST-150LOG-18-SSelect options
  • ST-125 1.25 inch On-Side Square Tube 800x800 - Max-Gain Systems Inc.

    1-1/4″ On-Side Fiberglass Square Hollow Tube

    $8.58$63.77
    SKU: ST-125LOG-18-SSelect options
  • 2″ On-Side Fiberglass Square Hollow Tube

    $14.40$103.44
    SKU: ST-2LOG-18-SSelect options
  • ST-175 1.75 inch On-Side Square Tube 800x800 - Max-Gain Systems, Inc.

    1-3/4″ On-Side Fiberglass Square Hollow Tube

    $11.18$94.82
    SKU: ST-175LOG-18-SSelect options

Customers who viewed this item also viewed…

  • Greenstone VHC-1 Vacuum Relay 800x800 - Max-Gain Systems Inc

    3.5 kV, 5 kV Peak, SPDT, 25 Amps, VHC-1 – NEW Vacuum Relay

    $119.95
    SKU: VHC-1Select options
  • 38 feet Heavy Duty Fiberglass Push-up Mast MK-6-HD 800x800 - Max-Gain Systems, Inc.

    38 feet Heavy Duty Fiberglass Push-up Mast MK-6-HD

    $329.95$445.95
    SKU: MK-6-HDSelect options
  • RT-1 1 inch OD Round Hollow Tube 800x800 - Max-Gain Systems, Inc.

    1″ OD, 3/4″ ID Fiberglass Round Tube

    $3.79$29.95
    SKU: RT-1Select options
  • PL-259 UHF male Solder On for LMR-400, RG-213, RG-8 7500-UHF 800x800 - Max-Gain Systems Inc

    PL-259, UHF male Solder Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax

    $2.25$158.00
    SKU: 7500-UHFSelect options