Replacement Painter’s Pole Female Coupling
3/4″-5 Acme female threaded coupling used to make short/light duty extensions when a little extra length is needed. These install on our 1 inch OD Round Tube or Rod Solid Rod and our 3/4 inch OD Round Tube or Round Solid Rod, respectively.
Quantity Pricing available. Make selection above to see quantity discounts
The best adhesive to use to attach the painters pole attachments to then ends of the fiberglass tubing (or any tube or rod that is smaller than the ID these will accept) is JB Weld, Original Cold-Weld Formula. Mix the epoxy then apply a generous layer around the end of the tubing or rod. Slide on the coupling and allow time to set.
One additional method could be used and that is the “pinning” method. Place the part on the end of the tube or rod. With the part “seated” drill a 9/64″ hole through the overlap area. Insert a #6:32 machine screw of the corresponding length to the largest diameter piece being drilled. An illustration of this method is below:
For Pinning through:
- 1 inch OD Parts, use #6:32 round-head machine screws, 1.25 inches long.
- 1.25 inch OD Parts, use #6:32 round-head machine screws, 1.50 inches long.
Looking for male painter’s pole threaded tips? See below:
|Standard Duty Painter's Pole Male Attachments||3/4 inch OD, 1 inch OD||$2.95 – $9.95|| |
|Painter's Pole Male Attachment Commercial Duty Stainless Steel||3/4 inch OD, 1 inch OD||$22.90 – $39.85|| |
Used in Extension Pole kits:
|Painters Pole Threaded Extension Pole Kits||2 Foot, 4 Foot, 8 Foot||$12.35 – $26.85|| |
If you are interested in larger, custom cut orders of fiberglass tube or rod with Painter’s Pole Attachments preinstalled for a product you are making, we would love to talk with you! Save time and money by letting us deliver your assemblies ready for production. We can help you determine what rod or tube best meets your needs and determine a production time based on when the product is scheduled, any fabrications, etc… Contact us
About Max-Gain Systems, Inc.
Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge, and we can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…