RFK-6396 high speed SPDT RF switching relay

$14.95

SPDT auxiliary contact set

Features:

  • All welded, hermetically sealed construction
  • Coax interconnections, using RG-196A/U silver/Teflon coax
  • 200 watts RF carry capability
  • 75 watt RF switching capability
  • Low level to 2 amp auxiliary switching contacts
  • Coil voltage is 26.5 VDC
  • Coil resistance is 675 ohms
  • Impedance: 50 ohms

52 in stock

SKU: RLY-MSC-01/RFK-6396 Categories: , , ,

RFK-6396 high speed SPDT RF switching relay with SPDT auxiliary contact set

We have LARGE QUANTITIES of these excellent, very fast (4 milliseconds maximum… typically much faster!) RF relays for sale. These relays are an excellent choice for low-level RF switching, such as with the Jennings RJ1A or Kilovac HC-1 in QSK applications.

The HI-G d’Italia relays have TWO sets of SPDT contacts. One set is for RF, the other set is for auxiliary switching and control applications (non-RF). These relays are supplied with 50 ohm RG-196A/U teflon coax and one SSMB male (snap on) and one SMB male (snap on) gold plated Mil-spec connector. One mating chassis mount SSMB and SMB female connector included with each relay. These relays were removed from brand new military equipment, and are fully guaranteed!

The RFK-6396 relays were made to a special military specification (denoted by the “6396” in the part number. While it is not possible to find out just what this additional specification was, it is safe to say that it was more performance in some way than the standard RFK series relay. The specifications for the standard RFK series are available, and are listed here:

Features:

  • All welded, hermetically sealed construction
  • Coax interconnections, using RG-196A/U silver/Teflon coax
  • 200 watts RF carry capability
  • 75 watt RF switching capability
  • Low level to 2 amp auxiliary switching contacts
Coil Voltage 26.5 VDC
Coil Resistance 675 Ohms
Contact Rating DC auxiliary contacts low level to 2A, 28VDC
RF contacts 75 watts switching 200 watts carry (cold switching)
Contact Resistance 50 milliohms max
Close Speed 4 ms maximum
Release Speed 3 ms maximum
Frequency Range DC to 500 Mhz at full ratings
usable to 1000 MHz at reduced ratings
VSWR:
<1.1:1 at 100 MHz
<1.2:1 at 500 MHz
Insertion Loss 0.16 dB typical at 100 MHz
0.5 dB typical at 500 MHz
Impedance 50 ohms
Crosstalk 50 dB typical at 100 MHz
40 dB typical at 500 MHz
Environmental -65 degrees C to +85 degrees C
20 G’s vibration, 10 to 2000 HZ
100 G’s shock, 6 milliseconds
Insulation Resistance 1000 megohms min at 500 VDC
Dielectric Strength 500Vrms between all mutually insulated points
Important Dimensions
Max Length 2.00 in / 50.80 mm
Max Width 0.50 in / 12.70 mm
Weight  0.60 oz / 17.01 g
Condition
Removed from equipment (most were BRAND NEW) excellent, fully guaranteed.
About Max-Gain Systems, Inc.

Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.

Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge, and we can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…

Additional information

Shipping Weight 1.00 oz
Shipping Dimensions 2.50 × 2.50 × 1.00 in
Coil Voltage

26.5 VDC

Resistance

675 Ohms

Impedance

50 OHM

Condition

Removed from equipment, Checked, and Guaranteed, Surplus

itemCondition

Manufacturer

HI-G d’Italia

Connection Type

, , ,