Painters Pole Threaded Extension Pole Kits

$12.35$26.85

Fiberglass Tube Extension Pole DIY Kits.
Totally non-conductive materials.

Outer Diameter: Select the outer diameter of the fiberglass tubing. 1 inch OD is stronger than 3/4 inch, but slightly heavier in weight.

Length: Select the length of the extension pole

Neck Type: Select the type of Male attachment for the top part of the extension pole

Clear

Painters Pole Threaded Extension Pole Kits

These Extension Poles are made of “E-Glass” Pultruded Fiberglass. Completely none conductive, strong, and light weight! The tips and couplings are standard 3/4 x 5 ACME painter’s pole thread with a patented “Cam-Lock” twist tapper. The thread is tapered toward the base. Being tapered allows your attachments to lock in place allowing you the peace of mind that your attachment will not begin to unscrew and fall off.

All Painter’s Pole Threaded Extension Poles are sold as Kits and some assembly is required.

Assembly

The best adhesive to use to attach the painters pole attachments to then ends of the fiberglass tubing (or any tube or rod that is smaller than the ID these will accept) is JB Weld, Original Cold-Weld Formula. Mix the epoxy then apply a generous layer around the end of the tubing or rod. Slide on the coupling and allow time to set.

JB Weld Original Cold-Weld Formula, Steel Reinforced 2 part epoxy

One additional method could be used and that is the “pinning” method. Place the part on the end of the tube or rod. With the part “seated” drill a 9/64″ hole through the overlap area. Insert a #6:32 machine screw of the corresponding length to the largest diameter piece being drilled. An illustration of this method is below:

Part Assembly Pinning Method

For Pinning through:

  • 1 inch OD Parts, use #6:32 round-head machine screws, 1.25 inches long.
  • 1.25 inch OD Parts, use #6:32 round-head machine screws, 1.50 inches long.

Painters Pole Combos

These tips are also available in kits. See these options below:

2-Piece Painter Poles

ImageNameMaximum Usable LengthLength When SleevedLength of TubesWeight per Linear Foot (lb/ft)PriceBuy
2 piece painters pole - Max-Gain Systems, Inc.
7.7 feet Adjustable 2-Piece Painter's Poles7 ft 7 in4 ft 3 in46.5 in$24.95$64.80
2 piece painters pole - Max-Gain Systems, Inc.
3.7 feet Adjustable 2-Piece Painter's Poles3 ft 8 in2 ft 3 in23.25 in$19.45$59.30
2 piece painters pole - Max-Gain Systems, Inc.
15.1 feet Adjustable 2-Piece Painter's Poles15 ft 1 in8 ft 3 in93 in$36.45$76.30
2 piece painters pole - Max-Gain Systems, Inc.
11.6 feet Adjustable 2-Piece Painter's Poles11 ft 5 in6 ft 3 in72 in$32.95$72.80

3-Piece Painter Poles

ImageNameMaximum Usable LengthLength When SleevedLength of TubesWeight per Linear Foot (lb/ft)PriceBuy
3 piece painters pole - Max-Gain Systems, Inc.
5.7 feet Adjustable 3-Piece Painter's Poles5 ft 7 in2 ft 7 in23.25 in$36.45$76.30
3 piece painters pole - Max-Gain Systems, Inc.
22.1 feet Adjustable 3-Piece Painter's Poles22 ft 1 in8 ft 6 in93 in$69.75$109.60
3 piece painters pole - Max-Gain Systems, Inc.
16.9 feet Adjustable 3-Piece Painter's Poles16 ft 10 in6 ft 6 in72 in$56.95$96.80
3 piece painters pole - Max-Gain Systems, Inc.
11.2 feet Adjustable 3-Piece Painter's Poles11 ft 3 in4 ft 6 in46.5 in$47.75$87.60

Additional information

Shipping WeightN/A
Shipping DimensionsN/A
Outer Diameter

1" OD (1 in) | 25.4 mm, 3/4" OD

Length

23.25 in, 46.5 in, 93 in

Neck Type

Adjustable Angle, Long – Clamping Accessory, Short

itemCondition

You may also like…