Type N male Clamp Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax

$6.95$487.00

Quantity Discounts Available:
(Single Piece) Price: $6.95 each
(10 Pack) Price: $62.60 per pack Save 10%
(25 Pack) Price: $139.00 per pack Save 20%
(50 Pack) Price: $278.00 per pack Save 20%
(100 Pack) Price: $487.00 per pack Save 30%

Pack Quantity: These are sold in “pack” quantities. Choose the pack size you would like. The per unit price is based on this pack size.

Type N male Clamp Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax

Silver Plated Brass Body
Gold Plated Brass Center Pin
PTFE Dielectric
“TGS”

Detailed Product Information
Description

This Type N male Clamp Connector is one of several thousand RF products available from Max-Gain Systems, Inc.

This connector is made from a Solid Brass body that is precision machined and plated with Silver for superior performance and value. This Type N male Clamp Connector has a PTFE dielectric and a gold plated brass center pin. The Type N Male interface contains a gasket, for shock- / vibration- resistant and waterproof connections.

7304-CS-400, 7304-CS

Compatible with Coaxial Cable Types: RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, Belden 8237, Belden 8267, Belden 9011, Belden 9913, and other 0.405 Inch OD Coaxial cable.

Installation Guide:

We will begin by installing the Type N male clamp connector on a piece of LMR-400. This process is the same for all the other types of cable with an outer jacket OD of 0.405. These connectors fit on a wide range of coax types including, but not limited to: RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, Belden 8237, Belden 8267, Belden 9011, and Belden 9913.

Coax Stripping:

Type N male Clamp Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax 7304-CS-400 Installation Guide Step 00 - Max-Gain Systems Inc

Coax Stripping:

First cut your cable to the desired length and place the “nut” and “gasket then strip the black jacket back approximately 0.36 inches / 9 mm.

Type N male Clamp Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax 7304-CS-400 Installation Guide Step 1 - Max-Gain Systems Inc

Comb out the braid and fan it out to you can get to the dielectric. Trim back the dielectric 0.234 inches / 6 mm.

Type N male Clamp Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax 7304-CS-400 Installation Guide Step 2 - Max-Gain Systems Inc

Pull the braid wires forward and taper them toward the center conductor. Place the clamp nut onto the coax by threading the braid through the center and push the clamp nut against the jacket as shown.

Type N male Clamp Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax 7304-CS-400 Installation Guide Step 3 - Max-Gain Systems Inc

Fold back the braid wires as shown below and trim the braid so it does not go over flange of the clamp nut. Solder the center pin onto the center conductor of the coax.

Solder-On Method:

Make sure the solder hole is facing up. Touch the soldering iron to the underside of the center pin directly under the solder hole. Touch the solder to the center conductor through the solder hole on the center pin. Allow the heat from the metal to melt the solder so that it wicks into the center pin. Once the solder melts it only takes a tiny amount of solder to make the connection. Do not allow the solder to pool over the solder hole. The outside of the center pin should be free of obstructions for insertion. Do not over heat the center pin which could cause swelling of the dielectric of the coax.

Type N male Clamp Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax 7304-CS-400 Installation Guide Step 4 - Max-Gain Systems Inc

Main Body Install:

Insert the cable and all of the parts into the connector body. Make sure that the gasket’s inner “V” channel goes correctly into the clamp nut. Tighten the back nut.

Type N male Clamp Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax 7304-CS-400 Installation Guide Step 5 - Max-Gain Systems Inc

Final Testing:

When this is completed, as a final test, you should always check resistance from the center pin to the body with an ohmmeter in a low resistance scale. After verifying that there are no braid – to – center pin shorts on the other end of the coaxial cable, you should see infinite resistance (open).

See our entire line RF Connectors and Adapters:

RF Connectors

RF Connectors 300x300 - Max-Gain Systems Inc

RF Adapters

RF Adapters 300x300 - Max-Gain Systems Inc

About Max-Gain Systems, Inc.

Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.

Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge, and we can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…

Additional information

Shipping Weight N/A
Shipping Dimensions N/A
Pack Quantity

Single Piece, 10 Pack, 25 Pack, 50 Pack, 100 Pack

Connection Type

, ,

Termination Type

Coax

Coax Type

, , , , , , , , ,

Gender

Male

Mount Method

None

Attachment Method

Connector Attribute

Body Style

Impedance

50 OHM

Body Material

Silver

Dielectric Insulator Material

PTFE

Pin Material

Gold

Material Designation

TGS

itemCondition

You may also like…

  • Type N male Crimp On for LMR-400, RG-213, RG-8 7305-N-400 800x800 - Max-Gain Systems Inc

    Type N male Crimp-On Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax (Best)

    $6.95$487.00
    SKU: 7305-N-400Select options
  • N-female, silver / Teflon, 4 hole panel mount (P/N: 7317-400)

    Type N Female 4-Hole Panel Mount Solder Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax

    $6.95$487.00
    SKU: 7317-N-400Select options
  • Male Protective cap 7510-M Male UHF, Type N, and Mic connector Cap

    Female Dust Cap for UHF Male (PL-259), Type N Male, and Multi-Pin Microphone Plug Connections

    SKU: 7510-M-P1
  • Type N female Crimp On for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax 7306-N-400 800x800 - Max-Gain Systems, Inc.

    Type N female Crimp Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax

    $5.95$238.00
    SKU: 7306-N-400Select options

Customers who viewed this item also viewed…

  • Greenstone VHC-1 Vacuum Relay 800x800 - Max-Gain Systems Inc

    3.5 kV, 5 kV Peak, SPDT, 25 Amps, VHC-1 – NEW Vacuum Relay

    $119.95
    SKU: VHC-1Select options
  • 38 feet Heavy Duty Fiberglass Push-up Mast MK-6-HD 800x800 - Max-Gain Systems, Inc.

    38 feet Heavy Duty Fiberglass Push-up Mast MK-6-HD

    $329.95$445.95
    SKU: MK-6-HDSelect options
  • RT-1 1 inch OD Round Hollow Tube 800x800 - Max-Gain Systems, Inc.

    1″ OD, 3/4″ ID Fiberglass Round Tube

    $3.79$29.95
    SKU: RT-1Select options
  • PL-259 UHF male Solder On for LMR-400, RG-213, RG-8 7500-UHF 800x800 - Max-Gain Systems Inc

    PL-259, UHF male Solder Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax

    $2.25$158.00
    SKU: 7500-UHFSelect options