Drive-On Base Mast Mount Kit

$199.95$349.95

Everything you need to mount your mast wherever you are and wherever you go! This set allows for use as a Drive-On mount OR a Ground mount!

Select the mast series you are trying to mount:
(STD for 2″ OD Masts / Poles)
(HD for 2.5″ OD Masts / Poles)
(EXT for 2.5″ OD Extend Masts)

Select if you would like the optional “Ease-of-Use” Tilt Mechanism:

SKU: MOUNT-DRV Category:

Drive-On Base Mast Mount Kit

They are finally here! Our customer’s have been asking for mounting systems for our Masts for years. After going through many different designs we have developed the most capable mounting system for use with our Masts. These Drive-On Base Mast Mount Kits include all you would need to mount your mast and use your vehicle as the main support weight. The optional Tilt mechanism allows for the mast to be tilted over, to rest on something, so you can easily work on the top of your mast without the need for a step ladder.

Features

Support Tube Polymer “Anti-Friction” Bearing – Polymer low friction bearing on an internal shelf allows for hand rotation of your mast when support tube clamp is loosened

Support Tube Coax / Cable Port – Port, located at the base of the support tubes, allows for Coax and Cables to be fed up through the mast protecting the Coax or Cable and allowing for a very clean looking install

Support Tube and Tilt Mechanism – Precision welds and made from as few pieces as possible to increase strength and durability

Hitch Bar Cross Drilled – These hitch bars are cross drilled, where the hitch bar attaches to the trailer hitch, allowing for rotation of the entire mount assembly for storage to get it out of the way when you are not currently using it

Steel Construction – These tubes being made from steel makes for no weak points allowing for additional strength

Laser Cut Slots and Holes – Precision laser cut holes for easy hardware insertion and a perfectly smooth base

Powder Coating – Expertly applied powder coating for maximum durability, life span, and a perfectly smooth finish

Stainless Steel Hardware – All hardware is stainless steel for longevity

Assembly

The Drive-On Mount uses the following components:

1x Mast Support Tube
1x Tilt Mechanism (optional)
1x 10″ x 22″ Base Plate
4x 3/8″ Stainless Steel Bolts (4x are needed if using the optional Tilt Mechanism, 2x if used with no Tilt Mechanism)

Step 1

(If you did not select the tilt mechanism option, proceed to Step 2)

Attach the Tilt mechanism to the Base Plate. Use the holes in the base plate that are located at one end of the 10″ x 22″ base plate.

M-TILT Mast Mount Tilt Mechanism
M-P1022 Drive-On Plate mounting holes to use - Max-Gain Systems, Inc.

Step 2

(With Tilt Mechanism)

Attach the Support Tube to the Tilt Mechanism. Be sure to point the “coax port” on the base of the support tube in the same direction as the T-Bolt of the Tilt Mechanism.Drive-On Mast Mount with tilt and support tube assembled in the proper orientation - Max-Gain Systems, Inc.

(Without Tilt Mechanism)

Attach the Support Tube to the Base plate. Orientation is not critical, but placing the “coax port” facing AWAY from the vehicle will allow easier access to the clamping bolt at the top of the support tube.Drive-On Mast Mount support tube assembled - Max-Gain Systems, Inc.

Step 3

Fully assembled Drive-On Mast Mount

(With Tilt Mechanism)

Mast Ground Mount Tilt Actuated - Max-Gain Systems, Inc.

(Without Tilt Mechanism)

Truck Drive-On Mast Mount - Max-Gain Systems, Inc.

Additional information

Shipping Weight N/A
Shipping Dimensions N/A
Mast Kit Series

Standard (STD), Ultra Heavy Duty (UHD), Heavy Duty (HD), Heavy Duty Extend (EXT)

Ease-of-Use Tilt?

No, Yes

itemCondition

You may also like…

  • Heavy Duty mast partially raised on a hitch mount for mounting a heavier antenna

    Trailer Hitch Mast Mount Kit

    $199.95$384.95
    SKU: MOUNT-HTCHSelect options
  • M-C25HDTCH23-K 2.5 inch Support Tube Tilt Cross 23 inch Hitch Bar 800x800

    Mast Mount “GO ALL OUT” Combo

    $449.95$459.95
    SKU: MOUNT-GAOSelect options
  • 7330-TGS N male to UHF female DGN Adapter - Max-Gain Systems, Inc.

    Type N male to UHF female Adapter (Best)

    $10.95$767.00
    SKU: 7330-TGS-A2Select options
  • PL-259 UHF male Solder On for LMR-400, RG-213, RG-8 7500-UHF 800x800 - Max-Gain Systems Inc

    PL-259, UHF male Solder Connector for RG-8, RG-11, RG-83, RG-213, RG-393, LMR-400, and other 0.405 Inch OD Coax

    $2.25$158.00
    SKU: 7500-UHFSelect options

Customers who viewed this item also viewed…

  • 25 feet Heavy Duty Fiberglass Push-Up Mast MK-4-HD 800x800 - Max-Gain Systems, Inc.

    25 feet Heavy Duty Fiberglass Push-Up Mast MK-4-HD

    $244.95$329.95
    SKU: MK-4-HDSelect options
  • Dacron Rope Spool Hexrope-4 1000 ft spool black dacron guy rope - Max-Gain Systems, Inc

    1/8 inch, Black Dacron Guy Rope (1,000 ft Spool)

    $99.95
    SKU: HEXROPE-4Add to cart
  • Guy Ring Sets 800x800 - Max-Gain Systems, Inc.

    Guy Ring Sets

    $19.96$34.93
    SKU: GR-SETSelect options