Assembly Instructions and Best Practices
NOTE: We have tried repeatedly to make totally water-tight tubing for push pole use, but we are convinced at this point that it cannot be done with the Pultrusion manufacturing process. There will always be the possibility of “pin-holes”, or very small pathways that exist all the way through the resin and glass fibers that will allow water (especially water under pressure, several feet down when being used in pushing boats) to find a way through and slowly “seep” inside.
Many of our customers have told us “no problem. I can waterproof it myself!” and have purchased our strong 1.5inch OD X 1/8″ wall tubes with the foot, spike, and clips, and with a little work have used it very successfully! Customers have told us many waterproofing methods they have used, such as coating the insides of the tubes with liquid polyurethane and painting the outside with epoxy paints, and many have used a product called POR-15. Here is a link to technical information on this product: http://www.por15.com/POR-15-Technical-Information_ep_62.html (We do not sell it, and we pass this along for informational purposes only for “the do-it-yourselfer” who wants to save some big bucks with a little work.) Customers report that this stuff is almost bullet-proof and adheres well to our tubes, though we have not tried it ourselves. Others have used bondo and rolled the tubes to meticulously find any pin holes and fill them. It is also handy that bondo dries gray.
Need a Shallow Water Anchor? Check out our DIY Shallow Water Anchors!
About Max-Gain Systems, Inc.
Max-Gain Systems, Inc. carries a full line of in-series, between series, right angle, T-shaped, quick connect, handie-talkie (BLACK), pigtails (coaxial jumpers), etc… RF adapters. Our RF adapter lines are constantly expanding. We keep our RF connector and adapter lines in stock. We ship both retail and wholesale quantities. To become a dealer / wholesale user, contact us with your potential usage.
Max-Gain Systems, Inc. is the number one supplier of fiberglass round hollow tube, square tube and round solid rod to the antenna manufacturing industry. We produce millions of feet a year for hundreds of different industries including but not limited to: marine / boating, aeronautical, agriculture, construction, emergency services, etc…. We have the unique ability to sell one piece or even a semi-truck full. Feel free to prototype using our fiberglass tube and rod then contact us for a quote on a production run. At production run quantities we can cut to your desired lengths at no additional charge, and we can also perform several different fabrications (example: drilling holes in precise locations along a tube) to ensure your delivered material is ready for assembly. We have several accessory items designed for our fiberglass including but not limited to: couplers, telescoping clamps, ferrules, etc…